Spray foam 316 Insulation is an eco-friendly alternative to fiberglass batts. It resists both conduction (heat flow in) and convection (airflow out), keeping your home warm in the winter and cool in the summer.

A spray polyurethane foam is a plastic material that is created when two liquid chemicals, isocyanate and polyol resin, meet at the tip of a gun and chemically react to create a plastic foam solution. This foam is sprayed onto roof tiles, concrete slabs or wall cavities and immediately expands to fill the space. It is then left to dry in place.

Top Reasons to Opt for Spray Foam Insulation

When used in the attic, spray foam creates a seal that prevents hot air from moving out of your home. This helps your HVAC systems work less, which saves energy. It also stops drafts, and it makes your floors warmer in the winter and cooler in the summer.

While spray foam insulation is non-toxic after it cures, the process itself does emit a gas that can cause blurred vision and difficulty breathing. This is why you need to wear a face mask and full protective gear when applying it.

Closed-cell spray foams are more expensive than open cell insulation, but they offer a better R-value per inch and an effective vapor barrier, which saves energy costs. The spraying process is more complex than putting up fiberglass, and it requires special equipment and training to ensure consistent coverage and proper expansion. It is recommended that homeowners use professional contractors for this reason.

316 Insulation
420 37th St NW – Unit F, Auburn, WA 98001
(253) 332-7606

Attic insulation acts as a barrier between the conditions outside your home and those inside, helping to maintain a comfortable temperature. When you have proper attic insulation, less heat is lost during the winter and air conditioning systems don’t need to work as hard. That savings on energy costs can help you keep more money in your pocket for other repairs and upgrades.

There are different types of attic insulation, and the one you choose depends on your home’s needs, budget and climate. Each type of attic insulation has a unique R-value, which indicates its ability to prevent the flow of heat from hot to cold. The higher the R-value, the better the insulating power.

Choosing the Right Attic Insulation: Factors to Consider

A good attic insulation professional will inspect your attic and consider the condition of any existing insulation before installing new materials. They will also look for any potential problems with the roof and rafters that could affect your new insulation. For instance, they may recommend fixing any roof leaks to ensure that your newly installed attic insulation is effective.

Some of the most popular attic insulation options are fiberglass batts and cellulose. Both are made of recycled materials and are eco-friendly. Fiberglass batts are available in varying thicknesses and R-values. They are easy to install with a tool and can be purchased in rolls that reduce installation time.

Cellulose is an eco-friendly, cellulose-based insulation material that can be sprayed or blown into the attic. It has an R-value between 3.2 and 3.7 per inch, and is often mixed with ammonium sulfate or borate to make it fire-resistant. It is also easy to install with a machine and is good for irregularly shaped areas or around obstructions.

Quality Insulation
205 Hawk Trail #2, Winchester, VA 22602, United States
540-532-5929

HD Spray Foam is a thick, closed-cell polyurethane insulation that provides effective air and thermal barrier protection. It’s injected into wall cavities, between studs and other framing elements to create a tight building envelope. Its unique properties prevent air and heat from escaping, which helps homeowners save money on heating and cooling bills.

The Advantages of Spray Foam Insulation with HD Spray Foam

Professional installers use large rigs to mix and apply the foam. The technicians are trained in proper chemical storage and equipment maintenance, which greatly reduces the risk of structural damage or environmental damage during the process. When choosing a contractor, look for SPFA professional certification.

Before spraying, the crew will prep the area by cleaning and ensuring that it’s free from dust, debris and dirt. Then, they’ll run a hose to the attic, crawl space or rim joists in new construction or to walls and uninsulated nooks and crannies in existing homes or pole barns. They’ll then squirt the spray foam, which expands to fill gaps, cracks and holes.

Closed cell foam has the advantage of blocking moisture, which is a contributing factor to mold growth. It also has a lower Global Warming Potential (GWP) of 1 compared to the 3,400-plus GWP of hydrofluorocarbons used in other foam insulators.

Another benefit of spray foam is its ability to block out noise. The foam’s tiny pockets create barriers that make it difficult for sound to travel through walls and ceilings. This means outside noises stay outside and home occupants can relax without being disturbed by neighborhood kids or late-night dinner parties.

HD Spray Foam
900 Pryor Ave, Pocola, OK 74902
(479) 856-5090