HD Spray Foam is a thick, closed-cell polyurethane insulation that provides effective air and thermal barrier protection. It’s injected into wall cavities, between studs and other framing elements to create a tight building envelope. Its unique properties prevent air and heat from escaping, which helps homeowners save money on heating and cooling bills.

The Advantages of Spray Foam Insulation with HD Spray Foam

Professional installers use large rigs to mix and apply the foam. The technicians are trained in proper chemical storage and equipment maintenance, which greatly reduces the risk of structural damage or environmental damage during the process. When choosing a contractor, look for SPFA professional certification.

Before spraying, the crew will prep the area by cleaning and ensuring that it’s free from dust, debris and dirt. Then, they’ll run a hose to the attic, crawl space or rim joists in new construction or to walls and uninsulated nooks and crannies in existing homes or pole barns. They’ll then squirt the spray foam, which expands to fill gaps, cracks and holes.

Closed cell foam has the advantage of blocking moisture, which is a contributing factor to mold growth. It also has a lower Global Warming Potential (GWP) of 1 compared to the 3,400-plus GWP of hydrofluorocarbons used in other foam insulators.

Another benefit of spray foam is its ability to block out noise. The foam’s tiny pockets create barriers that make it difficult for sound to travel through walls and ceilings. This means outside noises stay outside and home occupants can relax without being disturbed by neighborhood kids or late-night dinner parties.

HD Spray Foam
900 Pryor Ave, Pocola, OK 74902
(479) 856-5090

The Foam Depot Insulation Company is a smart way to reduce energy costs and improve the comfort of your home. It helps your home maintain a consistent temperature year-round, which reduces the strain on your HVAC system during the hot summers and cold winters. The investment in attic insulation will pay off with lower energy bills and increased resale value of your home.

There are many ways to insulate your attic, but the most effective type is spray foam. It is a two-part liquid that expands to form a solid, insulating layer upon curing. It can be applied to the attic’s ceiling and walls, and fills every crevice, sealing air leaks, and improving your home’s thermal efficiency. Spray foam insulation also offers a high R-Value and is highly moisture resistant.

Top Benefits of Attic Insulation | The Foam Depot Insulation Company Explains

Other insulation options include blanket and blown-in. Blanket insulation is a popular DIY option that comes in sheets that can be easily affixed to unfinished attics. It is made of plastic, fiberglass, or natural materials like wool and minerals. It is inexpensive and provides a good R-value. However, it can lose effectiveness over time as it is susceptible to moisture.

Blown-in insulation, a common choice for attics, is available in a variety of materials including fiberglass, cellulose, and rockwool. It is blown into place using special equipment, allowing it to fill gaps and nooks more thoroughly than other types of insulation. It is less expensive than spray foam, but can be clogged by dust and debris.

The Foam Depot Insulation Company
812-322-9417
1430 Raymond Rd Martinsville, IN

Spray foam 316 Insulation is an eco-friendly alternative to fiberglass batts. It resists both conduction (heat flow in) and convection (airflow out), keeping your home warm in the winter and cool in the summer.

A spray polyurethane foam is a plastic material that is created when two liquid chemicals, isocyanate and polyol resin, meet at the tip of a gun and chemically react to create a plastic foam solution. This foam is sprayed onto roof tiles, concrete slabs or wall cavities and immediately expands to fill the space. It is then left to dry in place.

Top Reasons to Opt for Spray Foam Insulation

When used in the attic, spray foam creates a seal that prevents hot air from moving out of your home. This helps your HVAC systems work less, which saves energy. It also stops drafts, and it makes your floors warmer in the winter and cooler in the summer.

While spray foam insulation is non-toxic after it cures, the process itself does emit a gas that can cause blurred vision and difficulty breathing. This is why you need to wear a face mask and full protective gear when applying it.

Closed-cell spray foams are more expensive than open cell insulation, but they offer a better R-value per inch and an effective vapor barrier, which saves energy costs. The spraying process is more complex than putting up fiberglass, and it requires special equipment and training to ensure consistent coverage and proper expansion. It is recommended that homeowners use professional contractors for this reason.

316 Insulation
420 37th St NW – Unit F, Auburn, WA 98001
(253) 332-7606